NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

30,1625 mm x 72 mm x 36,51 mm TIMKEN GN103KRRB Insert Bearings Spherical OD: da : 60.325 mm; Bearing : 22215 EK

31.75 mm x 80 mm x 38,1 mm TIMKEN GN104KLLB Insert Bearings Spherical OD: Fillet Radius ra : 0.30 mm; Grease Speed Rating Open/Shielded n1 : 36000 rpm

28,575 mm x 72 mm x 36,51 mm TIMKEN GN102KLLB Insert Bearings Spherical OD: Basic Static Radial Load Rating Co : 88000 N; B : 36.50 mm

TIMKEN GKY100RRB Insert Bearings Spherical OD: Fillet Radius ra : 3.00 mm; Basic Dynamic Radial Load Rating C : 251000 N

60 mm x 110 mm x 61,91 mm TIMKEN GE60KRRB Insert Bearings Spherical OD: Fatigue load limit Pu : 19.3 kN; Reference speed : 5300 r/min

25 mm x 52 mm x 34,92 mm TIMKEN GE25KRRB Insert Bearings Spherical OD: D : 1360 mm; Da max. : 1337 mm

61,9125 mm x 110 mm x 60,32 mm TIMKEN GC1207KRRB Insert Bearings Spherical OD: Grease Speed Rating Open/Shielded n1 : 5000 rpm; Basic Static Radial Load Rating Co : 62000 N

20 mm x 47 mm x 34,13 mm TIMKEN GE20KRRB Insert Bearings Spherical OD: RG : 3/4 NPT; Cap bolt : 4 x 3/4-10 UNC

17 mm x 40 mm x 27,78 mm TIMKEN GE17KRRB Insert Bearings Spherical OD: r1,2 min. : 1 mm; Calculation factor f : 1.06

74,6125 mm x 130 mm x 70,64 mm TIMKEN GC1215KRRB Insert Bearings Spherical OD: H1 : 133.35 mm; Bearing : 22224 EK

55,5625 mm x 100 mm x 53,97 mm TIMKEN GC1203KRRB Insert Bearings Spherical OD: Minimum load factor A : 0.79; D : 160 mm

50,8 mm x 100 mm x 53,97 mm TIMKEN GC1200KRRB Insert Bearings Spherical OD: Recommended diameter for attachment bolts, inch G : 0.375 in; Mass bearing unit : 0.31 kg