NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Cylindrical OD

Insert bearing with narrow inner ring and two set screws. Cylindrical OD. This type bearing is self-aligning for the standard load capacity.The ER Series Insert Bearings have an inner ring that extends on both sides of the bearing to provide extra shaft support and a cylindrical OD. ER Series Insert Bearings are available in both 52100 Chrome Steel and 440C Stainless Steel. Chrome Steel Insert Bearings are harder than Stainless Steel and more durable in demanding applications.

The CSA Cylindrical OD Light Duty Narrow Inner Ring Set Screw Insert Bearing is factory lubricated with Chevron SRI#2 AW (anti-wear) grease. The insert contains 30-40% grease fill by volume. The CSA insert is factory sealed after lubrication and is considered Lubed-for Life.Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

23,8125 mm x 52 mm x 34,92 mm TIMKEN 1015KRR Insert Bearings Cylindrical OD: Accessory : No Cover; RoHS : 6

22,225 mm x 52 mm x 34,92 mm TIMKEN 1014KRR Insert Bearings Cylindrical OD: RoHS : 6; Unit, Type : Bearing unit

22,225 mm x 52 mm x 34,92 mm TIMKEN 1014KLL Insert Bearings Cylindrical OD: Weight : 1.47 kg; Recommended tightening torque for set screw : 11.5 Nm

19.05 mm x 47 mm x 34,13 mm TIMKEN 1012KLL Insert Bearings Cylindrical OD: Max operating temperature, Tmax : 200 °C; Y1 : 2.09

17,4625 mm x 40 mm x 27,78 mm TIMKEN 1011KLL Insert Bearings Cylindrical OD: Shape : Flanged Pilot Type; Bearing Part Number : 6704

19.05 mm x 47 mm x 34,13 mm TIMKEN 1012KL Insert Bearings Cylindrical OD: H : 124 mm; T min. : -20 °C

15,875 mm x 40 mm x 27,78 mm TIMKEN 1010KRR Insert Bearings Cylindrical OD: D : 90.49 mm; Inventory : 0.0

15,875 mm x 40 mm x 27,78 mm TIMKEN 1010KLL Insert Bearings Cylindrical OD: SW : 3.18 mm; D : 62 mm

12,7 mm x 40 mm x 27,78 mm TIMKEN 1008KRR Insert Bearings Cylindrical OD: Bearing Used : Deep Groove Ball Bea; Housing Material : 1045 Carbon Steel

49,2125 mm x 90 mm x 49,21 mm TIMKEN 1115KLL Insert Bearings Cylindrical OD: Width T(mm) : 19; Bearing Retained : Yes (with retaining

TIMKEN G1115KPP3 Insert Bearings Cylindrical OD: S : 19 mm; L1 : 27 mm

49,2125 mm x 90 mm x 49,21 mm TIMKEN G1115KRR Insert Bearings Cylindrical OD: rs min : 1.5 mm; D1 : 87.1 mm