NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

42,8625 mm x 85 mm x 46,83 mm TIMKEN GC1111KRRB Insert Bearings Spherical OD: h : 5 mm; r1,2 min. : 1.5 mm

31.75 mm x 62 mm x 37,31 mm TIMKEN GC1103KRRB3 Insert Bearings Spherical OD: Grease Speed Rating n1 : 7000 rpm; Fillet Radius ra : 1.00 mm

15,875 mm x 40 mm x 26,59 mm TIMKEN GC1010KRRB Insert Bearings Spherical OD: RG : 3/4 NPT; PosiTrac Plus contact element (db shaft position) : B10724-155

19.05 mm x 47 mm x 30,96 mm TIMKEN GC1012KRRB Insert Bearings Spherical OD: A1 : 222.25 mm; R2 : 46.831 mm

28,575 mm x 62 mm x 37,31 mm TIMKEN GC1102KRRB Insert Bearings Spherical OD: P90° : 136 kN; da : 160 mm

30,1625 mm x 62 mm x 37,31 mm TIMKEN GC1103KRRB Insert Bearings Spherical OD: Fillet Radius rb : 0.60 mm; Oil Speed Rating n2 : 19000 rpm

25,4 mm x 52 mm x 34,92 mm TIMKEN 1100KLLB Insert Bearings Spherical OD: h : 31 mm; a : 3 mm

TIMKEN G1215KRRB TDCF Insert Bearings Spherical OD: da : 93.662 mm; H : 213.519 mm

TIMKEN G1211KRRB TDCF Insert Bearings Spherical OD: Sealed Speed Rating n3 : 3200 rpm; Basic Static Radial Load Rating Co : 163000 N

DODGE INS-SC-105-CR Insert Bearings Spherical OD: Da max. : 152.5 mm; α : 6 °

DODGE INS-SC-203-CR Insert Bearings Spherical OD: d1 ≈ : 179.6 mm; B2 : 23 mm

DODGE INS-SCM-200-HT MOD Insert Bearings Spherical OD: Pa : 32.7 kN; P180° : 162 kN