NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

50,8 mm x 120 mm x 55,56 mm TIMKEN GN200KRRB Insert Bearings Spherical OD: Oil Speed Rating Open/Shielded n2 : 3200 rpm; B : 45.00 mm

55,5625 mm x 120 mm x 55,56 mm TIMKEN GN203KLLB Insert Bearings Spherical OD: d : 600 mm; Mass angle ring : 27.5 kg

49,2125 mm x 110 mm x 50 mm TIMKEN GN115KLLB Insert Bearings Spherical OD: Mass housing : 427 kg; Q180° : 2100 kN

41,275 mm x 100 mm x 42,86 mm TIMKEN GN110KRRB Insert Bearings Spherical OD: da max. : 79 mm; Calculation factor kr : 0.045

38,1 mm x 90 mm x 41,28 mm TIMKEN GN108KLLB Insert Bearings Spherical OD: d : 15.000 mm; Basic Static Radial Load Rating Co : 4750 N

42,8625 mm x 100 mm x 42,86 mm TIMKEN GN111KLLB Insert Bearings Spherical OD: B : 52.00 mm; Oil Speed Rating Open/Shielded n2 : 3200 rpm

36,5125 mm x 80 mm x 38,1 mm TIMKEN GN107KLLB Insert Bearings Spherical OD: B : 33 mm; d : 80 mm

34,925 mm x 80 mm x 38,1 mm TIMKEN GN106KLLB Insert Bearings Spherical OD: Basic static load rating C0 : 180 kN; Basic dynamic load rating C : 66 kN

TIMKEN GKY104RRB Insert Bearings Spherical OD: Brand Name : TIMKEN; Model Number : GKY104RRB

TIMKEN GKY103RRB Insert Bearings Spherical OD: Ball diameter Dw : 6.35 mm; d : 25 mm

30,1625 mm x 72 mm x 36,51 mm TIMKEN GN103KLLB Insert Bearings Spherical OD: d1 : 320 mm; A : 9 mm

TIMKEN GKY012RRB Insert Bearings Spherical OD: d : 75 mm; D1 ≈ : 135.75 mm