NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

19.05 mm x 47 mm x 34,13 mm TIMKEN G1012KLLB Insert Bearings Spherical OD: r1s (min) : 1.5 mm; d2 : 40 mm

17,4625 mm x 40 mm x 27,78 mm TIMKEN G1011KRRB Insert Bearings Spherical OD: d : 50 mm; Da max. : 77 mm

TIMKEN G1010KRRB TDCF Insert Bearings Spherical OD: Diameter E : 121.0 mm; Fillet Radius ra : 2.50 mm

TIMKEN G1008KRRB TDCF Insert Bearings Spherical OD: Pu : 1.056 kN; da : 57 min

100,0125 mm x 215 mm x 100,01 mm TIMKEN GN315KRRB Insert Bearings Spherical OD: B : 100 mm; r, r1,2 min. : 2.1 mm

87,3125 mm x 190 mm x 87,31 mm TIMKEN GN307KRRB Insert Bearings Spherical OD: Basic Dynamic Radial Load Rating C : 121000 N; D : 140.0000 mm

74,6125 mm x 160 mm x 74,61 mm TIMKEN GN215KLLB Insert Bearings Spherical OD: Material constant KM : 330; ra max. : 1 mm

80,9625 mm x 170 mm x 80,96 mm TIMKEN GN303KRRB Insert Bearings Spherical OD: Fillet Radius ra : 2.00 mm; Basic Static Radial Load Rating Co : 60000 N

74,6125 mm x 160 mm x 74,61 mm TIMKEN GN215KRRB Insert Bearings Spherical OD: B : 25.00 mm; Basic Static Radial Load Rating Co : 31000 N

68,2625 mm x 150 mm x 68,26 mm TIMKEN GN211KLLB Insert Bearings Spherical OD: Adapter sleeve assembly : SNW 3026x4.7/16; N1 : 22.225 mm

61,9125 mm x 130 mm x 61,91 mm TIMKEN GN207KRRB Insert Bearings Spherical OD: d2 ≈ : 64.742 mm; Calculation factor kr : 0.03

61,9125 mm x 130 mm x 61,91 mm TIMKEN GN207KLLB Insert Bearings Spherical OD: Comparative radial load rating CF : 490 kN; B : 152.4 mm