NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Cylindrical OD

Insert bearing with narrow inner ring and two set screws. Cylindrical OD. This type bearing is self-aligning for the standard load capacity.The ER Series Insert Bearings have an inner ring that extends on both sides of the bearing to provide extra shaft support and a cylindrical OD. ER Series Insert Bearings are available in both 52100 Chrome Steel and 440C Stainless Steel. Chrome Steel Insert Bearings are harder than Stainless Steel and more durable in demanding applications.

The CSA Cylindrical OD Light Duty Narrow Inner Ring Set Screw Insert Bearing is factory lubricated with Chevron SRI#2 AW (anti-wear) grease. The insert contains 30-40% grease fill by volume. The CSA insert is factory sealed after lubrication and is considered Lubed-for Life.Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

41,275 mm x 85 mm x 42,86 mm TIMKEN G1110KRR Insert Bearings Cylindrical OD: b : 18 mm; Associated sleeve reference : H3134

42,8625 mm x 85 mm x 42,86 mm TIMKEN G1111KRR Insert Bearings Cylindrical OD: Basic Dynamic Load Rating(N) : 4000; Type : Ball

38,1 mm x 80 mm x 42,86 mm TIMKEN G1108KLL Insert Bearings Cylindrical OD: Lw : 11.3 mm; Characteristic outer ring frequency, BPF0 : 10 Hz

TIMKEN G1107KRRS Insert Bearings Cylindrical OD: Bearing Part Number : 6900; Bearing Material : [Steel] Steel

36,5125 mm x 72 mm x 37,7 mm TIMKEN G1107KRR Insert Bearings Cylindrical OD: B : 34 mm; T min. : -20 °C

36,5125 mm x 72 mm x 37,7 mm TIMKEN G1107KLL Insert Bearings Cylindrical OD: Number of Bearings : Single; Seals : ZZ (Double Shield)

34,925 mm x 72 mm x 37,7 mm TIMKEN G1106KRR Insert Bearings Cylindrical OD: Outer Ring : With Outer Ring; Lubricant : NS Hairyu-bu Grease

31.75 mm x 72 mm x 37,7 mm TIMKEN G1104KLL Insert Bearings Cylindrical OD: Housing Material : 1045 Carbon Steel; Bearing Retained : No

30,1625 mm x 62 mm x 36,51 mm TIMKEN G1103KLL Insert Bearings Cylindrical OD: Type : Bearings with Housin; Width T(mm) : 8

30,1625 mm x 62 mm x 36,51 mm TIMKEN G1103KRR Insert Bearings Cylindrical OD: Unit, Type : Insert Bearing Unit; Surface Treatment : No

SKF YET 206-103 CWU Insert Bearings Cylindrical OD: Dynamic load, C : 66 kN; Characteristic cage frequency, FTF : 0.42 Hz

TIMKEN ER8DD Insert Bearings Cylindrical OD: Pitch (p) : 1.5; Type : Lock Nut