NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

66,675 mm x 125 mm x 68,26 mm TIMKEN G1210KRRB Insert Bearings Spherical OD: G3 : 9 mm; Lock nut : HM 3048

61,9125 mm x 110 mm x 61,91 mm TIMKEN G1207KLLB Insert Bearings Spherical OD: Grease Speed Rating Open/Shielded n1 : 9000 rpm; Basic Dynamic Radial Load Rating C : 25500 N

TIMKEN G1207KRRB TDCF Insert Bearings Spherical OD: G : Tr 710x7; Locking device : MS 30/710

60,325 mm x 110 mm x 61,91 mm TIMKEN G1206KRRB Insert Bearings Spherical OD: Fillet Radius ra : 1.50 mm; Oil Speed Rating n2 : 5000 rpm

57,15 mm x 110 mm x 61,91 mm TIMKEN G1204KRRB Insert Bearings Spherical OD: a : 17.384 mm; Basic dynamic load rating C : 99.9 kN

TIMKEN G1203KRRB TDCF Insert Bearings Spherical OD: Basic dynamic load rating C : 715 kN; h : 12.5 mm

55,5625 mm x 100 mm x 55,56 mm TIMKEN G1203KLLB Insert Bearings Spherical OD: Size (mm) : 55,5625 mm x 100 mm x 55,56 mm

53,975 mm x 100 mm x 55,56 mm TIMKEN G1202KRRB Insert Bearings Spherical OD: Static axial stiffness, preload class B : 33 N/µm; db min. : 28.2 mm

TIMKEN G1200KRRB TDCF Insert Bearings Spherical OD: Oil Speed Rating n2 : 2600 rpm; Basic Dynamic Radial Load Rating C : 449000 N

49,2125 mm x 90 mm x 49,21 mm TIMKEN G1115KLLB Insert Bearings Spherical OD: Calculation factor Y2 : 3.4; Calculation factor Y0 : 2.2

TIMKEN G1112KRRB TDCF Insert Bearings Spherical OD: D : 72.0000 mm; Basic Dynamic Radial Load Rating C : 30700 N

44,45 mm x 85 mm x 42,86 mm TIMKEN G1112KPPB4 Insert Bearings Spherical OD: r1 min. : 0.6 mm; d2 max. : 114 mm