NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Insert Bearings Spherical OD

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

55,5625 mm x 130 mm x 55,56 mm TIMKEN SMN203KS Insert Bearings Spherical OD: B : 29.00 mm; Basic Dynamic Radial Load Rating C : 79200 N

42,8625 mm x 110 mm x 42,86 mm TIMKEN SMN111KS Insert Bearings Spherical OD: D : 310.0000 mm; Basic Dynamic Radial Load Rating C : 276000 N

36,5125 mm x 88 mm x 38,1 mm TIMKEN SMN107KS Insert Bearings Spherical OD: Grease : 0.530 kN; rs Dynamic (Cr) : 1.5 mm

30,1625 mm x 80 mm x 36,51 mm TIMKEN SMN103KS Insert Bearings Spherical OD: Basic Interchange SPLIT : -; Basic Radial Load Rating-Dynamic DC : 13600 lbf

87,3125 mm x 165 mm x 87,31 mm TIMKEN SM1307KS Insert Bearings Spherical OD: Basic Dynamic Radial Load Rating C : 221000 N; Fillet Radius rb : 1.00 mm

74,6125 mm x 145 mm x 74,61 mm TIMKEN SM1215KS Insert Bearings Spherical OD: dc : 85.725 mm; da : 90 mm

31.75 mm x 79 mm x 37,7 mm TIMKEN SM1107KS Insert Bearings Spherical OD: Basic Static Radial Load Rating Co : 1120 N; Sealed Speed Rating n3 : 19000 rpm

25,4 mm x 57 mm x 34,93 mm TIMKEN SM1100KS Insert Bearings Spherical OD: da max. : 196 mm; Da max. : 293.5 mm

TIMKEN 1103KPPB3 Insert Bearings Spherical OD: N4 max. : 40 mm; Appropriate attachment bolt, rec. tightening torque : 3640 N·m

TIMKEN 1103KPPB4 Insert Bearings Spherical OD: Insert Bearing IB : Stainless Steel; Dimension A2 : 0.5938 in

TIMKEN MUOB 2 3/16 Insert Bearings Spherical OD: Grease Speed Rating n1 : 7000 rpm; Sealed Speed Rating n3 : 7000 rpm

TIMKEN MUOB 2 15/16 Insert Bearings Spherical OD: J max. : 434.975 mm; Pa : 28.5 kN