NTN BEARING MANUFACTURING DE MEXICO,S.A.DE C.V.

Angular Contact Ball Bearings

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft.It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

 

 

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 


 

1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 5209C Angular Contact Ball Bearings
3,175 mm
1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 1.189 Inch | 30.2 Millimeter
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Ball Bearings
Cam Follower and Track Roller - Stud Type
Cam Follower and Track Roller - Yoke Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Flange Block Bearings
Hanger Unit Bearings
Insert Bearings Cylindrical OD
Insert Bearings Spherical OD
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
6802 Bearing
Bearing 6000
6302 Bearing
6202rs Bearing